Hytek tank water soaker for removing water from fuel tanks.
The Hytek Tank Water Soaker is designed to absorb water that settles at the bottom of compatible fuel storage tanks. Condensation can build up inside fuel tanks over time, creating water contamination that may contribute to corrosion, poor fuel quality and poor engine starting.
The water soaker is lowered into the tank using the attached cord until it reaches the bottom, where water naturally settles beneath the fuel. As it absorbs water, the internal polymer expands inside the mesh containment tube, helping remove water build-up from the tank.
Choose your water absorption size
- WS2 – absorbs up to 489ml: approx. 5.6cm x 30cm
- WS3 – absorbs up to 1.59L: approx. 10cm x 30cm
Supplied complete with:
- Hytek Tank Water Soaker in your selected absorption capacity
- Attached cord for lowering and retrieving from the tank
Tank water soaker key features
- Designed to absorb water from the bottom of compatible fuel storage tanks
- Suitable for diesel, heating oil and petrol applications
- Made with a super-absorbent polymer
- Mesh filter containment tube helps keep the absorbed water contained
- Both versions are 300mm long
- Supplied with a cord for deployment and retrieval
- Check monthly and replace every 3 months, or when fully expanded
- Useful for fuel storage maintenance and water contamination control
This fuel tank water absorber is a practical maintenance product for tanks where water may collect at the bottom through condensation or contamination. It can be used as part of regular fuel tank care to help reduce water build-up before it causes bigger fuel quality or tank condition issues.
Always select the correct size for your application and make sure the water soaker does not obstruct sender units, tank outlets or moving vehicle tank components. Dispose of the used water soaker in accordance with local regulations and the type of liquid absorbed.
Downloads
Hytek WS2 Water Soaker Instructions (PDF)



