1″ Diesel & Oil Delivery Hose | Gravity Fed Pump Hose Cut Lengths

1″ diesel delivery hose cut lengths and fitted hose assemblies.

This 1″ diesel delivery hose is available in selectable lengths for gravity-fed and low-pressure pump transfer setups. Choose from plain-ended continuous cut lengths or selected fixed-length hose assemblies supplied with fitted 1″ M BSP ends.

For plain-ended options, the hose is supplied as one continuous cut length. For example, selecting 10 metres means you will receive one continuous 10m hose length, not ten separate 1m pieces.

The fitted-end hose assembly options are available in selected lengths and are supplied ready-made with 1″ M BSP inlet/outlet ends. These are useful where a pre-assembled hose is preferred instead of plain hose requiring separate fittings.

Choose your hose option

• Plain Ends: continuous cut hose with no fittings included
• Fitted 1″ M BSP Ends: selected set lengths supplied as hose assemblies with fitted male BSP ends

Supplied complete with:

• Selected length of 1″ diesel delivery hose
• Plain ends or fitted 1″ M BSP ends, depending on the option selected

1″ diesel delivery hose key features

• 1″ / 25mm internal diameter
• Approx. 34mm outside diameter
• Suitable for diesel and oil delivery
• Designed for gravity-fed and low-pressure pump systems
• 10 bar maximum working pressure
• Plain-ended continuous cut lengths available up to 50 metres
• Fitted-end assemblies available in selected lengths with 1″ M BSP ends

This hose is a practical choice for diesel transfer, oil delivery and gravity-fed fuel dispensing setups where a flexible 1″ hose is needed. The plain-ended options can be used with suitable compatible fittings, hose tails and clamps, while the fitted-end assemblies are supplied with 1″ M BSP ends already fitted.

Always check the required hose length, internal diameter, fuel compatibility, end type and fitting requirements before ordering. Select the correct end type and hose length from the options above to match your dispensing setup.