Cim-Tek 70062 (260HS-10) Hydrosorb Fuel Filter Element | 10 Micron 68–70 LPM
Product Type: Cim-Tek Hydrosorb fuel filter element
Part Number: 70062 / 260HS-10
Filtration: 10 micron
Flow Rate: Approx. 68–70 litres per minute
Thread: 1″-12 UNF
Free Delivery
FREE standard UK delivery available on this item, typically within 2-3 working days.
Need it faster? Upgrade to Royal Mail Tracked 24 for only £0.99 ex VAT.
Cim-Tek 70062 Hydrosorb fuel filter element for diesel and fuel transfer systems.
The Cim-Tek 70062 (260HS-10) Hydrosorb Fuel Filter Element is a 10 micron spin-on replacement element for compatible fuel filtration systems. It is designed for fuel pump and dispenser applications where both particulate filtration and water management are required.
This Hydrosorb element helps remove fine debris from fuel while also detecting and holding water contamination. It is a practical replacement filter for diesel, gas oil, kerosene and compatible fuel transfer setups where clean fuel delivery is important for protecting pumps, meters, nozzles and equipment.
Supplied complete with:
- Cim-Tek 70062 / 260HS-10 Hydrosorb fuel filter element only
Cim-Tek 70062 Hydrosorb filter key features
- 10 micron Hydrosorb fuel filter element
- Part number: 70062
- Common reference: 260HS-10 / 260HS-II-10
- Flow rate: approx. 68–70 litres per minute
- Maximum working pressure: 3.4 bar / 50psi
- Thread: 1″-12 UNF
- Approx. size: 94mm diameter x 220mm length
- Hydrosorb media helps remove particulate and manage water contamination
- Water-holding capacity before flow restriction: approx. 260ml
- Replacement element only — filter head/housing is not included
This Cim-Tek Hydrosorb fuel filter element is a useful service part for compatible pumped diesel and fuel transfer systems. It can be used when the existing filter element is blocked, saturated, dirty or due for routine replacement.
Always check the part number on your existing filter element before ordering. This product is the replacement spin-on element only and should only be used with compatible filter heads and suitable fuel transfer systems. Not for use with aviation fuels.
Downloads
| Brand | Cim-Tek |
|---|---|
| Product Type | Hydrosorb Fuel Filter Element |
| SKU | CTH1819 |
| MPN | 70062 |
| Alternative Part Reference | 260HS-10, 260HS-II-10 |
| Filter Type | Hydrosorb Water & Particulate Filter Element |
| Filtration | 10 Micron |
| Flow Rate | 68–70 Litres Per Minute |
| Maximum Working Pressure | 3.4 Bar / 50psi |
| Thread | 1"-12 UNF |
| Diameter | 94mm |
| Length | 220mm |
| Water Holding Capacity | Approx. 260ml Before Flow Restriction |
| Fuel Compatibility | Diesel, Gas Oil, Kerosene, Petrol E10, HVO, GTL |
| Suitable For | Fuel Transfer Pumps, Fuel Dispensers, Diesel Transfer Systems, Compatible Filter Heads, Fuel Filtration Systems |
| Use | Replacement Hydrosorb filter element for removing particulate and managing water contamination |
| Application | Fuel Filtration, Water Contamination Control, Diesel Transfer Maintenance, Filter Element Replacement |
| Aviation Fuel Use | No |
| Included | Replacement Element Only |
| Delivery | FREE Standard UK Delivery, Approximately 2-3 Working Days, Royal Mail Tracked 24 Upgrade Available |
Compatibility
This listing is for the replacement filter element only (not the filter head/housing).
- Part number: Cim-Tek 70062
- Micron rating: 10 micron
- Application: Pump / fuel transfer (installation dependent)
How to confirm it fits
Check the label on your existing element. If it shows 70062, this is the correct replacement.
FAQs
Is this the complete filter assembly?
No — this is the replacement element only.
When should I replace it?
If flow drops, the pump sounds strained/noisy, contamination is suspected, or during routine servicing.
Still unsure?
Contact us with a photo of your existing filter label and your setup details.
Related products
